■ October 27, 2023 – Notice of compatibility with “macOS 14 Sonoma”
Our “11” series products have been compatible with Apple’s new OS “macOS 14 Sonoma” from Ver. 11.x.12.0.
Customers using the macOS version of the products should download
and use the latest program from the download site.
* Regarding the operation of the products on Mac with Apple Silicon,
it has been confirmed that it works with Rosetta 2.
However, native support for Macs with Apple Silicon is undecided.
—–
【For customers using versions “10” series and earlier products】
The update program for the old version of our product
(versions “10” series and earlier products) has been discontinued
due to the release of the successor product.
Therefore, there are no plans to release an update program in the future.
When “macOS 14 Sonoma” is applied,
“10” series products and earlier versions are not guaranteed to work.
Customers using versions “10” series and earlier products are advised
to use the currently supported macOS version.
Thank you for your cooperation.
■ January 24, 2023 – Notification Concerning End of Support for “Windows® 8.1”
We appreciate our deepest gratitude for your continued support of our products.
With the conclusion of support for Windows® 8.1 as announced by Microsoft (*), our company will remove Windows® 8.1 from the list of Operating Systems compatible with existing products after January 24, 2023, as follows.
* Windows 8.1 support ended on January 10, 2023
The security updates for Microsoft operating system vulnerabilities have been discontinued.
If you continue to use Windows® 8.1, you are more likely to be victims of malicious programs such as viruses and spyware.
Customers using Windows® 8.1 are requested to move to the latest OS as soon as possible.
Thank you very much for your understanding in this matter.
■ December 12, 2022 – Notice of compatibility with “macOS 13 Ventura”
We have supported Apple’s new OS “macOS 13 Ventura”
from Ver. 11.x.7.0 for the “11” series products.
Customers using the macOS version of the products should download
and use the latest program from the download site.
* Regarding the operation of the products on Mac with Apple Silicon,
it has been confirmed that it works with Rosetta 2.
However, native support for Macs with Apple Silicon is undecided.
—–
【For customers using versions “10” series and earlier products】
The update program for the old version of our product
(versions “10” series and earlier products) has been discontinued
due to the release of the successor product.
Therefore, there are no plans to release an update program in the future.
If you apply macOS 13 Ventura, you will not be able to use
older versions of our products.
Customers using versions “10” series and earlier products are advised
to use the currently supported macOS version.
Thank you for your cooperation.
■ July 19, 2022 – Notice of termination of program update service
The program update service of “10” series was finished
with the final versions released on July 19, 2022.
The above products support Windows11 version 21H2 and/or earlier versions.
In the future, we will not respond to new operating systems,
new cameras or program modifications.
If you are using a new OS or camera, please consider upgrading to the current product.
We appreciate your continued support of our products.
■ December 14, 2021 – Notice of compatibility with “macOS 12 Monterey”
We have supported Apple’s new OS “macOS 12 Monterey”
from Ver.10.x.17.0 for the current “10” series products.
Customers using the macOS version of the “10” series products should download
and use the latest version of the program from the download site.
* Regarding the operation of “10” series products on Mac with Apple Silicon,
it has been confirmed that it works with Rosetta 2.
However, native support for Macs with Apple Silicon is undecided.
—–
【For customers using versions “9” series and earlier products】
The update program for the old version of our product
(versions “9” series and earlier products) has been discontinued
due to the release of the successor product.
Therefore, there are no plans to release an update program in the future.
If you apply macOS 12 Monterey, you will not be able to use
older versions of our products.
Customers using versions “9” series and earlier products are advised
to use the currently supported macOS version.
Thank you for your cooperation.
■ December 14, 2021 – Notice of compatibility with “Windows 11”
We have supported Microsoft’s new OS “Windows 11”
from Ver.10.x.16.0 for the current “10” series products.
Customers using the Windows version of the “10” series products
should download the latest version of the program from the download site,
install it, and then use it.
—–
- Added on May 2, 2022
Photo ExpressViewer” is now officially compatible with “Windows 11” from Ver. 1.0.2.1.
[Products whose operation has been confirmed]
We have confirmed the operation of the “Photo Express Viewer”
on Microsoft’s new OS “Windows 11”.
Customers using the “Photo Express Viewer” should download the latest version
of the program from the download site, install it, and then use it.
—–
【For customers using versions “9” series and earlier products】
The update program for the old version of our product
(versions “9” series and earlier products) has been discontinued
due to the release of the successor product.
Therefore, there are no plans to release an update program in the future.
If Windows 11 is applied, the old version of our product is not covered
by the operation guarantee.
Customers using versions “9” series and earlier products are advised
to use the currently supported Windows version.
Thank you for your cooperation.
■ November 30, 2020 – Notice of SILKYPIX series product compatibility with “macOS 11 Big Sur”
Thank you for using our products.
We supported Apple’s new OS, “macOS 11 Big Sur”,
for the current product “10” series.
Customers using the macOS version of the “10” series products should download
and use the latest version of the program from the download site.
* We are currently verifying the operation on a Mac equipped with an M1 chip.
We will inform you on our homepage as soon as we have confirmed the operation
and are ready to release.
* Added on February 4, 2021
Regarding the operation of “10” series products on Mac with M1 chip,
it has been confirmed that it works with Rosetta 2.
—–
【For customers using versions “9” series and earlier products】
The update program for the old version of our product
(versions “9” series and earlier products) has been discontinued
due to the release of the successor product.
Therefore, there are no plans to release an update program in the future.
If you apply macOS 11 Big Sur, you will not be able to use
older versions of our products.
Customers using versions “9” series and earlier products are advised
to use the currently supported macOS version.
Thank you for your cooperation.
■ September 3, 2020 – Notice of termination of program update service
Thank you for using our products.
The program update service of “9” series was finished
with the final versions released on September 3, 2020.
The above products support Windows10 version2004（20H1）and/or earlier versions.
In the future, we will not respond to new operating systems, new cameras or program modifications.
If you are using a new OS or camera, please consider upgrading to the current product.
We appreciate your continued support of our products.
■ January 15, 2020 – Notification Concerning End of Support for “Windows® 7″
We appreciate our deepest gratitude for your continued support of our products.
With the conclusion of support for Windows® 7 as announced by Microsoft (*1),
our company will remove Windows® 7 from the list of Operating Systems
compatible with existing products after January 15, 2020, as follows.
*1 https://support.microsoft.com/en-us/help/4057281/windows-7-support-will-end-on-january-14-2020
If you continue to use Windows® 7, security updates for Microsoft operating system
vulnerabilities have been discontinued, and you are more likely to be victims of
malicious programs such as viruses and spyware.
Customers using Windows® 7 are requested to move to the latest OS as soon as possible.
Thank you very much for your understanding in this matter.
■ October 16, 2019 – Notice of SILKYPIX series product compatibility with “macOS 10.15 Catalina”
Thank you for using our products.
We supported Apple’s new OS, “macOS 10.15 Catalina”,
for the current product “9” series.
Customers using “9” series products should download and
use the latest program from the download site.
—–
In addition, if “macOS 10.15 Catalina” is applied,
it cannot be used with the previous version of our products
(versions “8” series and earlier products).
Users are encouraged to use the currently supported macOS version.
Thank you for your cooperation.
■ May 30, 2019 – Notice of termination of program update service
Thank you for using our products.
The program update service of “8” series was finished
with the final versions released on March 22, 2019.
The above products support Windows10 version1809 and/or earlier versions.
In the future, we will not respond to new operating systems, new cameras or program modifications.
If you are using a new OS or camera, please consider upgrading to the current product.
We appreciate your continued support of our products.
■ October 24, 2017 – Notice of termination of program update service
Thank you for using our products.
The program update service of “7” series was finished
with the final versions released on October 23, 2017.
In the future, we will not support to new OSs and new cameras, and not fix the program.
Please consider upgrading to the current products.
We appreciate your continued support of our products.
■ Jan. 27, 2016 – Notification Concerning Halt of Support for “Windows® 8”
We would like to extend our deepest gratitude for your continued support of Ichikawa soft laboratory merchandise.
With the conclusion of support for Windows® 8 as announced by Microsoft (*1), our company will remove Windows® 8 from the list of Operating Systems compatible with existing merchandise.
Thank you very much for your understanding in this matter.
*1 Please refer to the following web site of Microsoft for more details.
(External Links) Microsoft Support Lifecycle
http://support.microsoft.com/en-us/lifecycle?C2=16796